NOTE: The hull is in stratified fiberglass, with a manual process for the first layers (skin coat) followed by an infusion stratification. To ensure resistance, the quickwork is in “single skin” laminate with high-resistance axial frames of type E glass. To ensure a low weight, the topwork is in sandwich laminate with balsa core and type E glass skins. As a finish, a neopentyl-isophthalic gelcoat is applied with high resistance to osmosis and aging from UVA rays. This construction process is the best you can find on the market.

The data are preliminary, not binding and subject to change without notice. The performances are expected for the standard version at 1/3 of the load with a clean hull, optimized propellers and calm sea conditions.

DATA SHEET

Overall length hull                    LOA = 6,99 m

---

Approval length                        LH = 6,88 m

---

Width                                         BH = 2,55 m

---

Draft                                           0,40 m

---

Displacement                           1800 Kg

---

Water tank                                70 l

---

Fuel tank                                   270 l

---

Installable power                    250 CV

---

CE Category                            C – 6 pple | D – 8 pple

PERFORMANCES

Cruising speed (approx)                        24-25 kn

---

Maximum design speed (approx)        40 kn

---

Consumption (approx)                           26l/h